BitPost - Brush On - Timber Stain & Preserver

(1 review) Write a Review
$45.48
SKU:
SKU-77-4 Litre

Product Overview

DESCRIPTION

BitPost ™ is an alternative product for Creosote or Carbolineum. It is a New Zealand manufactured bituminous oil based emulsion / polymer product.

Because of its rot-resisting and disinfecting effect, BitPost ™ is ideally suited for the preservation and staining of wooden structures such as Post and Rail fences, Retaining walls and Construction timber framing etc. It is also suitable to preserve in-ground planted posts.


Timber requires one coat only and One (1) Litre will cover approximately 2 to 3 Square Meters. On Post and (3 rails) fence 1 Litre will cover approximately 2 to 3 linear meters, stained on both sides.

  • 4ltr will cover 8 to 12 Square Meters or 8 to 12 linear meters of Post & Rail Fence
  • 20ltr will cover 40 to 60 Square Meters or 40 to 60 linear meters of Post & Rail Fence
  • 200ltr will cover 400 to 600 Square Meters or 400 to 600 linear meters of Post & Rail Fence

BitPost ™ - Brush on is intended primarily for surface application by brushing, dipping or by airless spray equipment.
BitPost ™ - Brush on Gives an economical yet high quality finish which is ideal for larger projects.

A re-coat will be required after 3 to 5 years, where after it will last another 8 to 10 years before coating again.

The colour is black to very dark brown.

Please have a look at our BitPost ™ Fence Stain Application Pack for sale under the Consumables & Equipment category

BitPost ™ - Brush on is now also available at Cambridge, Thomsons Hamilton, Thomsons Whatawhata, Thomsons Papakura and Matamata Post & Rails ITM

 

FEATURES

  • BitPost ™ is an alternative product for the use of Creosote or Carbolimium which has been limited and/or forbidden by some countries due to the introduction of stricter environmental regulations.
  • BitPost ™ will retard distortion, movement and splitting of timber, due to weather exposure
  • BitPost ™ is non-corrosive to metals
  • Can be used on other wood structures
  • Suitable on in-ground Posts
  • Will penetrate the timber rapidly
  • For best results apply to dry timber
  • BitPost ™ is idealy suited for:
  • Horse Fencing : Horses will not nibble on coated fence
  • Chicken Coops : BitPost will reduce the risk of RED MITE infestation
  • Vegetable Gardens : BitPost can be used on boxes and stakes

 

TECHNICAL SPECS

For more detailed information please see our documents below.

BitPost ™
is an oily water emulsion, water-soluble, non-flammable, black to very brown mixture from bitumen, water and petroleum components, smelling of tar.
BitPost ™ is a New Zealand manufactured, creosote alternative, bituminous emulsion / polymer product which will penetrate the timber rapidly due to its viscosity.
BitPost ™ gives a high degree of water repellence and will retard distortion, movement and splitting of timber, due to weather exposure.
BitPost ™ preserver is non-flammable and the treated wood, after drying, presents no greater fire hazard than ordinary timber.
BitPost ™ is non-corrosive to metals and can have a protective action on iron and steel.
BitPost ™ is non toxic and is safe around your animals.

 

PRODUCT DOCUMENTATION

These documents contain important information about:

  • Material Safety Data
  • General Information
  • Application
  • Storage
  • Safe use
  • First Aid
  • Clean Up
  • Warranty
  • Available Packing Sizes
  • and more information

Note: To view the following PDF documents, you will require some type of PDF-reader plugin on your system.
If you need an up-to-date plugin you can install Adobe's free PDF reader from here.



Documents:

Material Safety Data Sheet (MSDS)

Product Data Sheet (PDS)

General Information Summary

Information Brochure

Reviews

(1 review) Write a Review

1 Review Hide Reviews Show Reviews

  • 5
    All Good.

    Posted by Brian Stannett on 5th Nov 2019

    Would you reuse the empty containers, if returned.